HOME
PHC
- PHC Installation Manual (8077-C).pdf
- PHC Mechanical & Wiring Diagram and Specifications.pdf
- PHC Limited Warranty.pdf
- [Related Products]
- PHE / 40mm
- NHM / 60mm
The PHC-100A Interface Converter can convert SERIAL RS-232C to CONTACT CLOSURE. Connect this unit to the RS232C port on your programmed personal computer to control most PATLITE products, both visual and audible.
| SIZE: | Overall dimensions: 100mm x 118mm x 35mm |
|---|---|
| INPUT VOLTAGE OPTIONS: | Adaptor (included) converts AC120V into DC24V (center-negative) to power this Interface Converter |
| INPUT SIGNAL REQUIRED: | - RS-232C serial synchronous communications protocol - Uses TXD, RXD, RTS, CTS, SG connections via 9-pin DSub connector - Requires "straight-through" RS-232C communications cable purchased separately - Requires ASCII-code generating program purchased and installed separately - Controlled device(s) require the appropriate power supply purchased separately |
| OUTPUT FUNCTIONS AVAILABLE: | - 16 terminals provide 8 isolated contact outputs - Normally-open contacts can be controlled in any combination - Reset pushbutton provided to reset all outputs to the off (contact open) state |
| BODY STYLE: | - Low-profile steel casing - Bumper pads installed to protect surface finish |
| BODY COLOR: | Beige |
| RATINGS: | None available |
| PROTECTION: | None available |
| CONTROL OPTIONS: | Commercially available products can be used with this converter for control from a USB port |
