HOME
PHE / 40mm
The PHE-3FB Interface Converter can convert SERIAL RS232C to 3-LIGHT TOWER OPERATIONS. Connect this unit to the RS-232C port on your programmed personal computer to control the continuous, flashing and alarm functions on this tower.
| SIZE: | - Tower diameter: 40mm - Overall dimensions: 100mm x 118mm x 259mm |
|---|---|
| INPUT VOLTAGE OPTIONS: | Adaptor (included) converts AC120V into DC24V (center-negative) to power the tower functions as well as the Interface Converter section |
| INPUT SIGNAL REQUIRED: | - RS-232C serial synchronous communications protocol - Uses TXD, RXD, RTS, CTS, SG connections via 9-pin DSub connector - Requires "straight-through" RS-232C communications cable purchased separately - Requires ASCII-code generating program purchased and installed separately |
| OUTPUT FUNCTIONS AVAILABLE: | - Total of 8 functions available: - Red, amber, green continuous light (3 functions) - Red, amber, green flashing light (3 functions) - Fast-beep alarm, slow-beep alarm (2 functions - All 8 functions can be controlled in any combination - Reset pushbutton provided to reset all functions to the off state |
| BODY STYLE: | Interface Converter: - Low-pofile steel casing - Bumper pads installed to protect surface finish Tower: - Pre-assembled, mounted to converter - LED modules are interchangeable |
| BODY COLOR: | - Interface Converter: Beige - Tower: Beige |
| TIERS: | 3 tier only |
| MODULE COLORS: | Red / Amber / Green (only) |
| ALARMS | - Alarm 1: selectable, single-tone, intermittent (fast beep) alarm, 85dB (at 1m) - Alarm 2: selectable, single tone, intermittent (slow beep) alarm, 85dB (at 1m) |
| RATINGS: | None |
| PROTECTION: | None |
| CONTROL OPTIONS: | Commercially available products can be used with this converter for control from a USB port |
